Chill Diamond Fast
$70.38 – $131.98
CHILL DIAMOND™ is an epoxy system with 100% reactive materials with a very low viscosity and high resistance to ultraviolet. CHILL DIAMOND FAST™ is ideal to fill small cracks, voids and knots. It can also be use to cast small transparent objects or colored jewels such as earrings, necklaces, bracelets, hairpins, cufflinks and others. Its pot life allows a fast handling time, less than 12 hours. His very low viscosity allows a maximum infiltration of the interstices in the moulds or the different substrates on which CHILL DIAMOND™ is poured. This system also meets the European RoHS standard.*Best for sealing the wood, filling small cracks, crafts, etc.
- Ideal for thin epoxy pours
- Fastest setting time of 16-24 hours
- Self-rising/Bubble-free technology
- True-Zero VOC/Food Grade
- Pot life of 24 minutes
- Excellent UV resistance
- Crystal clear transparency
- Glossy Finish
- 2-component kit (2A/1B)
- Available in 1.5L or 3L S
- Commonly used in live edge woodworking for sealing the slab/edge and reducing the risk of bubbles from forming. Also used for touch-ups and surface prep due to its fast setting time.
Store CHILL DIAMOND FAST™ on a pallet (do not store directly on the floor) or shelf @ 22C/72F with relative humidity less than 60%. A cold environment will increase the viscosity of each part A and B and a warmer environment will decrease it. Before using CHILL DIAMOND FAST™ , be sure to mix each Part A (RESIN) and B (HARDENER). Minimize air formation as much as possible by gently mixing for a minimum of 8 to 10 minutes with a metal spatula. Mix exactly 2 parts of A with 1 part of B by volume (or 100 A / 42 B by weight) and make sure to mix evenly, making sure to scrape the edges and the bottom of your container. Since the pot life of the system is 24 minutes @ 22 ° C for a mass of 200 grams, be sure not to mix more material that can be applied within the life time pot. It is important to note that the pot life time will be shortened in a warmer environment and will be lengthened in a cooler environment. The handling time will reflect the temperature level. Also, the greater the amount of resins to be mixed, the shorter the pot life time will be. Uncured material can be easily cleaned using isopropyl alcohol or T-901 solvent.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size | 1.5L, 3L |
