Chill Ice 2


CHILL ICE 2™ is a 100% reactive epoxy system with very low viscosity and high ultraviolet resistance. The CHILL ICE 2™ makes it possible to cast river tables up to 2 inch thick up to 60L, in a single casting, while maintaining its transparency and high precision. Its long pot life makes it possible to mix several liters at a time and to pour a large quantity of resin during the production of the river table. This system also meets the European RoHS standard.

  • Best for med/large river tables or filling deeper cracks.
  • Ideal for pours up to 1.25″-2″ at a time.
  • Setting time of 72-96 hours
  • Self-rising/Bubble-free technology
  • True-Zero VOC/Food Grade
  • Pot life of 10 hours
  • Excellent UV Resistance
  • Crystal clear transparency
  • Glossy Finish *2-component kit (2A/1B)
  • Available in 3L, 12L, 30L, and 60L *Please ask about shipping for our 60L kit.
  • Commonly used in live edge woodworking for making medium/large epoxy river tables in one pour up to 2″ deep.

Store CHILL ICE # 2 on a pallet (do not store directly on the floor) or shelf @ 22 °C with relative humidity less than 60%. A cold environment will increase the viscosity of each part A and B and a warmer environment will decrease it. Before using CHILL ICE # 2, be sure to mix each Part A and B. Minimize air formation as much as possible by gently mixing for a minimum of 5 to 10 minutes with a metal spatula. Mix exactly 2 parts of A with 1 part of B by volume (or 100 A / 42 B by weight) and make sure to mix evenly, making sure to scrape the edges and the bottom of your container. Since the pot life of the system is 600 minutes @ 22 ° C for a mass of 200 grams, be sure not to mix more material that can be applied within the life time pot. It is important to note that the pot life time will be shortened in a warmer environment and will be lengthened in a cooler environment. The handling time will reflect the temperature level. Also, the greater the amount of resins to be mixed, the shorter the pot life time will be. Uncured material can be easily cleaned using isopropyl alcohol or T-901 solvent.

Additional information


3L, 12L, 30L, 60L