Chill 3D
$85.83 – $114.38
Chill 3D is a 100% reactive Epoxy System with medium viscosity and high ultraviolet resistance. The CHILL 3D™ allows to give depth and brilliance to your artistic canvas, countertop or other substrates such as concrete, wood, metals among others. Ideal for “lacing effects” and “beach scenes” on wooden surfaces. It’s an ideal product for thiner layers and can be poured up to 0.5 inch thick. Its thixotropic characteristics makes it possible to stabilize the pigments and avoid a separation in the casting. Its pot life of 60 mins at 22C/72F also allows fast handling time, depending on the density and design of the piece. This system also meets the European RoHS standard.
- Best for 3-D crafts, jewelry, “dome” effect, sealing art/photos, etc.
- High viscosity. One of the thickest resin options.
- Setting time of 24-36 hours
- Crystal clear transparency
- Excellent UV resistance
- Excellent heat resistance
- Self-rising/Bubble-free technology
- True-Zero VOC/Food Grade
- Pot life of 1 hour
- 2-component kit (1A/1B)
- Available in 1L or 2L Commonly used in live edge woodworking for protecting coating small crafts, sealing art on canvas, wood, or metal.
Store CHILL 3D™ on a pallet (do not store directly on the floor) or shelf @ 22C/72 with relative humidity less than 60%. A cold environment will increase the viscosity of each part A and B and a warmer environment will decrease it. Before using, be sure to mix each Part A (RESIN) and Part B (HARDENER). Minimize air formation as much as possible by gently mixing for a minimum of 8 to 10 minutes with a metal spatula. Mix exactly 1 part of “A” with 1 part of “B” by volume (or 100 A / 85 B by weight) and make sure to mix evenly, making sure to scrape the edges and the bottom of your container. Since the pot life of the system is 60 minutes @ 22C/72F be sure not to mix more material that can be applied within the pot life time. It is important to note that the pot life time will be shortened in a warmer environment and will be lengthened in a cooler environment. The handling time will reflect the temperature level. Also, the greater the amount of resins to be mixed, the shorter the pot life time will be. Uncured material can be easily cleaned using Isopropyl alcohol or T-901 solvent.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size | 1L, 2L |
