Chill Clear


CHILL CLEAR™ is an epoxy system with 100% reactive materials with a very low viscosity and high resistance to ultraviolet . CHILL CLEAR™ allows the cast up to 0.5 inches thick to cast transparent pieces such as jewelery, coasters, painting, flood coat, countertops or as topcoat on river tables. Its pot life of 60 minutes allows a fast handling time. Its very low viscosity allows maximum infiltration of the interstices in the moulds or the different substrates on which CHILL CLEAR™ is poured. This system also meets the European RoHS standard.

  • Best for filling, topcoat, bar tops, and resin crafts/jewelry
  • Ideal for pours up to 0.5″ thick at a time.
  • Crystal Clear transparency
  • Setting time of 24-36 hours
  • Self-rising/Bubble-free technology
  • True-Zero VOC/Food Grade
  • Pot life of 1 hour
  • Excellent UV resistance
  • Glossy Finish
  • 2-component kit (2A/1B)
  • Available in 1.5L, 3L, 12L, and 30L s
  • Commonly used in live edge woodworking as a protective topcoat for bars, countertops, and vanities. Works great as a wood sealer for a large resin pour and filling CNC laser cuts.

Store CHILL CLEAR™ on a pallet (do not store directly on the floor) or shelf @ 22 °C with relative humidity less than 60%. A cold environment will increase the viscosity of each part A and B and a warmer environment will decrease it. Before using CHILL CLEAR™, be sure to mix each Part A and B. Minimize air formation as much as possible by gently mixing for a minimum of 5 to 10 minutes with a metal spatula. Mix exactly 2 parts of A with 1 part of B by volume (or 100 A / 42 B by weight) and make sure to mix evenly, making sure to scrape the edges and the bottom of your container. Since the pot life of the system is 60 minutes @ 22 ° C for a mass of 200 grams, be sure not to mix more material that can be applied within the life time pot. It is important to note that the pot life time will be shortened in a warmer environment and will be lengthened in a cooler environment. The handling time will reflect the temperature level. Also, the greater the amount of resins to be mixed, the shorter the pot life time will be. Uncured material can be easily cleaned using isopropyl alcohol or T-901 solvent.

Additional information


1.5L, 3L, 12L